Mova D506i User Manual Download Page 565

Page: 565 / 644

563

Character

Entry

-press

Method

“

すずきじゅんこ

” is converted to “

鈴木淳子

”.

When Predictive Conversion is set to “standard convert”, you can also convert
by pressing

•

To select other characters, press

(convert) or

A list of conversions appears.

•

The order of the conversions depends on the learning status of the dictionary.

Press (convert).

“

鈴木

” is fixed.

•

The characters selected for conversion are fixed also when subsequent
characters are entered without pressing

(fix).

Press (fix).

The conversion list appears in accordance with the entered reading.
Item No./total No. of conversions

The conversion list of “

じゅんこ

” appears.

•

The conversion list also appears by pressing

•

While entries listed in the conversion are displayed, each time you press

(convert), an entry below will be selected. Alternatively, you can select

by pressing

•

A reading in roman letter will be displayed in Predictive Conversion list, too.

•

Up to 8 double-byte characters of each entry are displayed in the conversion
list.

•

Press

to exit the conversion list and return to the screen displayed

prior to conversion.

Press

(convert), and select “

順子

”.

“

順子

” is fixed.

•

Press

to restore fixed characters (see p.567).

Press (fix).

Characters are fixed.

Press (fix).

“

鈴木順子

” is entered.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands