manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 25

23

SAFETY

PRECAUTIONS

–

Always

follow

these

d

irections–

Using the mova in the vicinity of medical devices

Turn off the mova on packed trains or in crowded places as someone
with an implanted cardiac pacemaker or implanted defibrillator may be
nearby.

• The electromagnetic waves emitted by your mova could affect the function of a

cardiac pacemaker or implanted defibrillator.

The information given below conforms to the guidelines set forth by the
Electromagnetic Compatibility Conference regarding the protection of electronic
medical equipment from radio waves emitted by mobile phone units.

When inside a medical institution, always remember the following
guidelines:

• Never take the mova inside an operating room, intensive care unit (ICU), or coronary

care unit (CCU).

• Always turn off the mova in hospital wards.
• Even in the lobby and other areas, always turn off the mova when electronic medical

equipment is nearby.

• Follow the directives of the medical institution. There may be specific regulations as to

items that are prohibited or use of which is restricted.

• If you are using the auto power on function, cancel the setting and turn off the power.

If you are using electronic medical equipment other than implanted
cardiac pacemakers or implanted defibrillators at your home or outside
the confines of a medical institution, be sure to check with the
manufacturer about possible adverse effects caused by electromagnetic
interference.

• The electromagnetic waves emitted by your mova could affect the function of a

cardiac pacemaker or implanted defibrillator.

WARNING

If you have an implanted cardiac pacemaker or implanted defibrillator,
keep your mova at least 22 cm away from it (transmission output: 0.8 W).
Use and carry car phones or shoulder phones (transmission output: 
2.0 W) as well at a distance of more than 30 cm from the pacemaker or
defibrillator.

• The electromagnetic waves emitted by your mova could affect the function of a

cardiac pacemaker or implanted defibrillator.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands