manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 171

169

Using

the
Camera

Function

M

y

P

icture

View

8

If you set an image for a phone number of a Phonebook entry, the image appears in
the call reception screen when a call is received from that phone number. 

•

This is not available for “preset album”.

•

Images cannot be set in the following cases. Cancel the respective setting and then set the
image:

・

Phonebook Access Lock is set

・

Phonebook Store Lock is set

・

Phonebook Delete Lock is set

・

Keydial Lock is set

・

The Phonebook entry is set to Accept/Reject Calls

•

The following images cannot be set:

・

Flash movies

・

Images saved to Secret setting folder

・

Animation

・

Images whose use is fixed to a specific screen, such as an image for the Standby screen only

・

Images in “import album” whose size is larger than 240 dots wide and 320 dots high or vice

versa

・

Video taken by mova

1

Display an image, and select “add PHbook” from the submenu.

A selection screen for the destination appears.

•

This operation can also be performed from the picture/title list.

Setting images in the Phonebook

2

Select “1.phonebook” and press 

(select).

The list of Phonebook entries appears.

•

You can try various search type, and specify search criteria. The operating procedure is the
same as when you search the Phoneboook, in standby.

■

To set an image to Own Number Display

1

Select “2. own number” and press 

(select).

2

Enter your 4-digit terminal ID number.

•

When an image has already been set, a prompt appears. To change the setting, select
“YES” and press 

(select). To cancel the operation, select “NO”.

3

Select an entry to set the image and press 

(select).

The image is set in the Phonebook entry.

•

When an image has already been set, a prompt appears. To change the setting, select “YES”
and press 

(select). To cancel the operation, select “NO”.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands