Mova D506i User Manual Download Page 496

Page: 496 / 644

494

Previewing

Memory Stick Duo data (continued)

Using

Other

Functions

Previewing

Memory

Stick

data

: With sound
: Without sound or uncertain as to

whether it has sound

■

Movie album

■

Phonebook

■

Received/sent/unsent mail

: Single copied data item
: Copy/move in group, copy/move all data (backup data).

The saving date and time is used as a title.

: Invalid data

•

If there is no name, “(no name)” is displayed.

•

The telephone type is not displayed.

•

While you select data from the list and preview it, you can perform following
operations:

•

Press

(call) or

to make a call to the telephone number

registered in “phone 1:”.

•

Press

(mail) or

to set the mail address registered in “

1” as a

recipient and compose mail.

: Single copied data item
: Copy/move in folder, copy/move all data (backup data). The saving date and

time is used as a title.

: Invalid data

•

If there is no title, “(no title)” is displayed.

•

Press

(connect) or

during a preview of the data selected from the

data list to access i-mode sites or Internet web sites.

■

Bookmark

: Single copied data item
: Copy/move in folder, copy/move all data (backup data). The saving date and

time is used as a title.

: Invalid data

•

If there is no title, “(no subject)” is displayed.

•

Pressing

(select) displays the first frame of the

video. Pressing

(play) plays back the video. To

stop playback, press

(stop).

•

You can pause the playback. And you can
perform shot-by-shot forward, shot-by-shot
backward, fast forwarding, or rewinding while
paused (see p.183).

•

To adjust the volume, press

. Select the

volume by using

and press

(set).

•

To switch between the picture list and the title list, select the “title list” or “picture list” from the
submenu.

•

You can change the display size of the video (see p.182).

•

In Manner Mode or Drive Mode, the sound is not played back.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands