manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 213

211

Customizing

D

isplays

a

nd

Other

Indications

9

Set

P

artner

3

Press (select). 

The Visual Partner is set. 

■

To confirm a Visual Partner animation

1

Press (list).

2

Use 

to select a screen and then press 

(play).

The animation is played twice.
• To stop animation play, press 

(stop). Alternatively, you can use 

~

, 

,

, , ,  and  .

3

Press (return). 

Changing user data

You can check the image saved for “User data” in the Partner setting. You can also
newly store an image on the screen where an image has not yet been set and replace
the set image with the new one.

•

The following images cannot be set:

・

Images whose use is fixed to a specific screen, such as an image for the Standby screen only

・

Flash movies

・

Images saved to Secret setting folder

1

In standby, select “customize” 

“set partner” from the menu.

•

Alternatively, you can select “setting” 

“screen

•

display” 

“set partner” from the menu.

2

Select “User data” and then press 

(list).

Any image that is set appears.

•

Use 

to check images that are set on each screen.

•

“no user data is stored” appears on the screen where an image has not yet been set.

3

Use 

to select a screen and then select “change” from the submenu.

▲

▲

▲

•

When “User data” is set, a “no setting” animation is displayed on the screen when no animation is set. You
can check and change the set animation.

•

When setting “User data”, animations up to 240 dots wide and 132 dots high can be displayed in the
animation display area of each screen.
Images that are wider than the display area are reduced and displayed. In addition, when the image is taller than
the display area, the top and bottom are truncated and displayed accordingly.

•

Still images taken in burst mode are not played even if such images are set.

•

Character images set by the Partner setting are not displayed while a still image or a video clip is taken (in
camera or movie mode) or on a part of screen while i-

α

ppli is running. (“no setting” screen is displayed on

the screen.)
Even when “User data” is set, a “no setting” screen may appear by memory shortage.

N o t e

4

Select “1.camera album” or “2.import album” and then press 

(select).

The folder list appears.

•

Folders set as secret are not displayed.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands