Mova D506i, User Manual

Page: 280 / 644

278
Using
i-mode
to
G
et
Information
12
How to View and Use Sites (continued)
How
to
V
iew
a
nd
Use
S
ites
When mova mobile phone information (such as the model number and manufacturer serial number) is
required in site processing, the message “your terminal ID is requested, send your ID?” or “ready to send
your terminal ID?” appears when an item is selected. Select “YES” and press (select) to send the
mobile phone information to the site. Select “NO” if you do not want to send this information to the site.
•
Your mobile phone information (the model number and manufacturer serial number) is sent to information
providers over the Internet, so in certain cases third parties may be able to intercept the information.
Notification of mobile phone information
If a site includes infrared transmission capabilities, you can execute infrared transmission from the page.
1
Point the infrared port of the mova toward the receiving device, select an item and press (select).
2
Select “YES” and press (select).
•
To cancel the operation, select “NO”.
•
During infrared communication, keep your mova aimed toward and within 20 cm of the receiving device.
•
During infrared communication, the message “sending data by infrared” appears. appears on the
main display and the Inspiration window. Do not move your move until transmission ends.
•
The type of receiving device that can communicate and the kind of information that is transmitted varies
by the site.
•
Infrared communication function (see p.468)
Infrared transmission from sites
A character entry screen appears.Enter characters.
•
When a password or other important information is
entered, a series of “
” mask the entered
characters.
•
While character entry on a site, you can use Barcode
Reader to read and enter the barcode (JAN code or
QR code) (see p.194).
•
Character entry screen
•
Passwords and other information sent to a site are authenticated before the page is displayed. If the
password is incorrect, you are asked to reenter it and the page is not displayed until the correct password
is entered.
•
The site display of some Flash movies may differ from others even if they can be operated in the same
manner.
N o t e
The function of the selected command is performed.
There are different types of commands, as described
below (names of commands are shown as examples):
•
Commands that set an entry or selection on a page
and send it to the i-mode site.
Example :
•
Commands that cancel an entry or selection on a
page.
Example :
•
Command
OK Select
Clear
送信