manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 143

141

Using

the
Camera

Function

S

till

Image

P

hotography

8

You can use Frames preloaded in the mova or Frames downloaded via i-mode.

•

Available Frame sizes are as follows: “i-shot(S)”, “wallpaper”, and “i-shot(L)”. Regardless of the
current photo size settings, you can take still images with the Frame size you selected.

•

You can use Frame Shoot together with Burst Mode. The combinations available are:

・

For the 20-shot burst mode, “i-shot(S)” is available.

・

For the 4-shot burst mode, “wallpaper” is available.

•

You can perform the setting when the mova is open, then close the mova and take still images
with the new settings.

•

The setting is valid until shooting is completed.

•

Some Frames are available for image editing but not for photographing.

■

Preloaded Frames for “i-shot(S)” size

[Frame Shoot]

Taking still images with a Frame

■

Preloaded Frames for “i-shot(L)” size

■

Preloaded Frames for “wallpaper” size

Turning Frame Shoot on with the mova closed

1

In the Still Image Photography screen, select “frame shoot” from the
photography menu.

•

In the auto mode, the Camera Status Indicator glows blue while shooting, and turns red, when you end
shooting. In the manual mode, it glows red each time you shoot.

•

You can select and save a single shot from the still images you took in the Burst mode (see p.165).

•

You cannot change the camera settings once photo shooting is started.

•

The still images captured in the Burst mode cannot be resized and/or rotated, and are not available for the 
i-shot transmission. You can select, however, one shot from them and send it via i-shot transmission.

•

In the Burst mode, depending on the zoom setting, photography environment and the subject, the shooting
time could be longer than the specified burst speed.

N o t e

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands