manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 448

446

Using Various Functions from i-

α

ppli (continued)

Using

i-
p

pli

P

rograms

16

α

Using

V

arious

Functions

from

i-
ppli

1

Start infrared communication from within an application.

2

Select “YES” and press 

(select).

Infrared communication starts.

•

To cancel the operation, select “NO”.

•

Infrared communication (see p.468)

Using infrared communication from i-

α

ppli

•

When infrared communication is executed from an i-

α

ppli application, phone calls and data

communications from external devices can be performed even during infrared communication. When there
is a call or data communication from an external device, infrared communication ends and the application
is interrupted or terminated.

•

You can also start up an application using a infrared communication device (see p.476).

N o t e

•

Scanning may fail depending on the flaw, contamination, breakage, printing quality, light reflection, or QR
code version.

•

Barcodes other than JAN and QR codes cannot be scanned.

N o t e

α

2

Close the mova and read the barcode.

•

Follow Steps 3 - 5 in 

Scanning codes (see p.192)

•

Pressing 

does not end Barcode Reader. Open the mova and press 

(cancel).

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands