Mova D506i, User Manual

Page: 287 / 644

285
Using
i-mode
to
G
et
Information
12
Internet
Connection
•
You can stop receiving data by pressing (cancel) while receiving data.
•
If a web site contains too much data to display, the message “size of this page is not supported” appears.
Your mova will only display as much of the data as it can handle.
•
, or may appear when displaying web sites that contain images (see p.276).
•
You can display GIF, JPEG images and Flash movies.
•
appears when the page contains data that cannot be displayed or played back.
When displaying Internet web sites
When characters in Internet web sites are not correctly displayed, you can change the Character code to
display them correctly.
1
While displaying an Internet web site, select “change code” from the submenu.
Each time “change code” is selected the Character code changes in the following order:
Shift JIS
→
EUC
→
JIS
•
The Character code change only affects the page where the change is made.
•
When the displayed page is saved in a Screen memo, the page is saved in the Character code then.
The Character code can not be changed later in the Screen memo page.
About changing the Character code
3
Select an URL and press (select).
The Internet web site appears.
■ To edit and access an URL
1
Select an URL, and select “edit URL” from the submenu.
2
Press (edit), and edit the URL.
3
Press (connect).
■ To delete an URL
1
Select an URL, and select “delete one” from the submenu.
• Alternatively, you can press and hold down to delete an URL.
• Select “delete all” from the submenu to delete all URLs at once.
2
Select “YES” and press (select).
• To cancel the operation, select “NO”.
•
URLs that do not begin with “http://” or “https://” are not recorded in the log.
•
When the same Internet web site is repeatedly accessed, the most recent one URL is stored in the log.
N o t e