manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 458

456

Call Forwarding Service (continued)

Using

N

etwork

Services

Call

Forwarding

Service

17

Main operations from the mova

(Calls for the following operations are free of charge):

*

Up to 5 forwarding phone numbers can be saved.

Note: For details, see the “Network Services General User’s Manual”.

Activate the service

Deactivate the service

Set the ring time

Set the announcement

Set or change a
forwarding phone
number

Confirm settings

→

List number* (

to 

)

→

☆

To connect to the Voice Mail Service Center when a 2nd call is
received while the 1st call is being forwarded, or when the
forwarding number is busy

→

List number* (

to )

→

→

→

→

→

List number*

→

→

Setting

→

→

→

Setting

→

(

to )

→

Set a forwarding phone number 

→

→

→

Confirming

→

Charges

•

Call charge

Charged to 

the caller.

Charged to 

the subscriber.

Caller

Call Forwarding

Service 

subscriber

Forwarding 

phone number

Note:

•

Call forwarding to a forwarding phone number is charged based on the distance between the last
area where the power of the mova was on or where you activated the service and the area where
the forwarding phone number is located.

•

You are not charged while setting the forwarding phone number or activating/deactivating the service.

Activating and deactivating the service are possible from the menu. This is
convenient when you forget key sequences.

Simplified operations of the Call Forwarding Service

1

In standby, select “setting”

“network service”

“forward” from the

menu.

▼

▼

▼

▼

▲

▲

Deactivates the service.

Activates the service.

Sets or changes the forwarding phone number, etc.

+

Free of monthly charge

Call Charge

M413

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands