Mova D506i User Manual Download Page 304

Page: 304 / 644

302

Using

i-mode

et
Information

Making i-mode Settings (continued)

i-mode

ettings

Enter your 4-digit terminal ID number.

Select a user-defined host, and select “edit” from the submenu.

•

The host that is preset by default cannot be edited.

•

By default, the host varies depending on the contracted area.

・

DoCoMo

・

DoCoMo Hokkaido

・

DoCoMo Tohoku

・

DoCoMo Tokai

・

DoCoMo Hokuriku

・

DoCoMo Kansai

・

DoCoMo Chugoku

・

DoCoMo Shikoku

・

DoCoMo Kyushu

•

If hosts have already been registered, the host names are displayed in “02. user defined 01” to
“11. user defined10”.

Changing the connection host

Select a connection host in the connection host list and press

(select).

The connection host is changed.

•

The host number must be registered in order to specify it as a connection host.

Specify the host information.

Select each entry field and press

(select).

Enter the host information.

•

The “host name” field can contain up to 16 single-byte or 8 double-byte characters.

•

The “host number” field can contain up to 11 digits. (You must enter a host number.)

•

The “host address” field can contain up to 30 single-byte characters.

Press (store).

The host is registered.

Reverting the connection host setting to its default

Delete host information you set. When you reset the current host setting, the default setting is restored.

Select the user-defined host you want to reset in the connection host list, and
select “reset host” from the submenu.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Mova D506i, User Manual, Page: 304 / 644

Search results

Summary of Contents for D506i

Reviews: