manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 597

595

Appendix

Optional

Components

a

nd

Peripherals/Using

the
i-board

21

■

Contact information for the data link software technical matters

Mitsubishi Electric Data Link Support Center: 03-5319-3762
Business hours: 9:00 to 12:00/13:00 to 17:00 (closed on Saturdays, Sundays, national holidays, new
year’s holidays, and given holidays)

Pressing the Mail/i-mode key performs the same function as pressing 

on the mova D506i.

Press 

in standby to display the mail menu, which is used, for example, when displaying the

compose mail screen.
To display the i-mode menu, press 

+ 

.

(Mail/i-mode key) function

Insert the i-board connector firmly until it clicks.

•

When detaching the i-board, remove the i-board connector from the mova while depressing
the release buttons on the sides of the connector. Close the protective cap at the bottom of
the mova.

•

Do not fix the i-board with a band to protect it from erroneous operation.

2

1

Note the following points when the i-board D001 is used with the mova D506i.

•

The functions and operations of the i-board are the same with the D210i, D503i, D503iS, D211i,
D504i, D251i, D251iS, D505i, D252i, and D505iS.

•

The functions and operations of the i-board differ from when used with the D209i and D502i.
The differences are described below:

Open the protective cap of the connector at the bottom of the mova (see p.7).

Connecting the i-board

Using the i-board

■

Entering katakana when searching the Phonebook in Reading search

•

When the 5-press Method is selected 

While holding down 

, press  

(

カタカナ

) to switch to the kana mode, and enter characters.

(For the D209i and D502i, press the key corresponding to the character while holding down 

.)

•

When the 2-press Method is selected

While holding down 

, press the key corresponding to the number (2-digit number).

Keys corresponding to numbers (in 2-press Method)

カタカナ 

漢字 

英 
数 

特 
殊 

Numerics

Keys on the i-board

1

2

3

4

5

6

7

8

9

0

A S D F G Z

X C V B

■

Entering numeric characters (for phone numbers, date/time, menu item numbers, etc.)

Press to .
(For the D209i and D502i, press the key corresponding to the number while holding down 

.)

Entering characters

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands