manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 466

464

Caller ID Display Request Service

Using

N

etwork

Services

17

Caller

ID
Display

R

equest

Service

When a call is received without a Caller ID, an announcement requesting that the
caller turn on Caller ID is played and the call automatically ends. This service
allows you to prevent problems from unknown callers and thereby use your phone
with confidence.

•

No application is required for the “Caller ID Display Request Service”, and this service is
free of monthly charge and installation cost.

•

This service is available only when the reason of anonymity is “user unset”; the caller sets caller’s
number not to be displayed. (Calls whose anonymous reason is “payphone” and “not support”
are not covered by this service.)

•

Call Time while the announcement is played is charged to the caller. (if you are using a toll-
free number, it is added to your bill.)

Setting the Caller ID Display Request Service

The Caller ID Display Request Service can only be activated or deactivated from
your own mova (remote operation is not available).

(Calls for the following operations are free of charge):

Action

1

Press .

Action

2

Action

3

An announcement indicating the current setting for the service
(activated or deactivated) is played.

Activate the service

→

Press .

Deactivate the service

→

Press .

Action

4

An announcement indicating the new setting for the service
(activated or deactivated) is played.
Note: If you select the same setting as before, an

announcement is played indicating that the previous
setting is retained.

Action

5

Press .
Note: If you activate the service, an announcement requesting

that the caller turn on Caller ID when a call is received
without Caller ID.

•

When the Caller ID-based Call Block function is used simultaneously with this function, this function
precedes the other.

•

When the Caller ID Display Request Service and any of the following services are activated at the
same time, a call without Caller ID is handled as described below:

N o t e

Voice Mail Service

Plays a message requesting the Caller ID (messages are not saved).

Service/function

Method to handle calls without Caller ID

Call Forwarding Service

Plays a message requesting the Caller ID (calls are not forwarded).

Call Waiting Service

Plays a message requesting the Caller ID.

Plays a message requesting the Caller ID (the announcement for the
Drive Mode is not played).

Number Plus Service

Drive Mode

No message requesting the Caller ID is played for calls received at
additional numbers.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands