Mova D506i User Manual Download Page 202

Page: 202 / 644

200

Customizing

isplays

Other

Indications

Customizing the Standby Screen

Set Standby Screen

Set

tandby

Screen

You can change the Standby screen to your favorite image.

•

The Standby screen cannot be changed without setting the date and time except for the i-

ppli

Standby screen.

•

[Default] Screen: digital 1, Clock: digital clock (small), Clock format: 12-hour display

■

Displaying an image of “camera album” or “import album” (see p.201)

You can display still images taken with the camera or images downloaded via i-mode.

•

Displaying an image randomly (see p.204)

■

Displaying an image of “preset album” (see p.203)

•

When setting to “season”, the screen changes for each season.

•

When setting to “analog 1 - 2”, and “3D digital”, the time on the image is displayed by the current time.

•

The following images are preset by default:

When Set Standby Screen is changed while the i-

ppli Standby screen is being set up, the “release

ppli stand-by?” message appears. Select “YES” and then press

(select) to release the i-

ppli

Standby screen. Select “NO” to not release. When “NO” is selected, the i-

ppli Standby screen is displayed

instead of the Standby screen set in the Standby screen setting.

When you set the i-

ppli Standby screen

M4311

／

M121

season

message 1

message 2

message 3

season

digital 1

(Default)

digital 7

digital 8

digital 10

analog 1

analog 2

digital 2

digital 3

digital 4

digital 5

digital 6

digital 9

3D digital

Spring
(March to May)

Summer
(June to Aug.)

Autumn
(Sept. to Nov.)

Winter
(Dec. to Feb.)

•

When setting to “message 1 - 3”,
the message can be entered.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands