manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 530

528

Setting the Upper Call Cost Limit for Notification (continued) 

Using

Other

Functions

19

Call

Billing

•

If the specified upper limit is exceeded during a call, the information screen appears and an alarm sounds
after the end of the call. Pressing 

(OK) or 5 seconds elapse, the alarm sound stops and the Standby

screen appears. (Pressing one of the Side keys stops the alarm sound.) 

appears in the Standby

screen. (The alarm sound is not emitted if the method of notice is set to “stand-by display”.)

•

It is only the first time when the upper cost limit is exceeded that Call Billing is performed.

When you set Call Billing

•

If you change settings or if you perform “reset total” or “auto cost reset”, 

disappears.

•

In Manner Mode, an alarm does not sound regardless of the settings of Manner Mode Selection.

•

When a call in which “

￥

**” or “

￥

0” appears on the call cost confirmation screen is made (see p.526), no

notification is received even when the set limit is exceeded.

•

When you set “auto cost reset” activated, it is reset in case the date and time are changed in the day of
next month in the Clock setting.

•

Call Billing is based on the approximate cost. It is more or less different from the actual call charge.

•

If you set “auto cost reset” and the 1st day comes when the power is not on, the last reset date in the call
cost confirmation screen will be the date on which the power is turned on.

N o t e

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands