Mova D506i User Manual Download Page 518

Page: 518 / 644

516

Using Voice Recorder (continued)

Using

Other

Functions

Voice

ecorder

In standby, press and hold down

Current recording time/maximum recording time

Remaining number of marks that can be added

Current settings

The recording starts.

•

Alternatively, you can select “useful function”

“voice recorder”

“1. start recording” from the

menu.

•

You can also press

and select “1. start recording”.

•

Call Indicator flashes blue during recording.

•

The microphone mode can be changed using

(see p.520).

•

You can mark the recording (see p.518).

•

You can continue recording with the mova closed.

Press (stop).

Your voice is saved and the recording ends. The Standby screen appears.

•

When you start recording from the menu or by pressing

, the Voice Recorder menu appears.

You can play back recordings made in the mova.

•

To play back recordings saved in the

Memory Stick Duo, insert the Memory Stick Duo

(see p.481).

Playing back your voice

In standby, press and hold down

Use

to select “voice recorder” and press

▲

Recording with the mova opened

Playback with the mova closed

M6 31

▲

Press .

Your voice is saved and the recording ends. The Standby screen appears.

•

When you start recording from the sub-display menu, the Voice Recorder menu appears.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands