manualshive.com logo in svg

Mova D506i, User Manual, Page: 310 / 644

Share
Download
Mova D506i User Manual Download Page 310

308

Using

the
Message

S

ervice

13

Receiving Messages

Receive Message

Receive

M

essage

Incoming Messages are indicated by a ringtone and screen display. They are saved in
the Message R and Message F boxs, respectively. 

•

Maximum number of Messages that can be saved (see p.312).

•

Delivered Messages are stored at the i-mode center in following cases. For details about
receiving stored Messages, see p.311.

・

During a call

・

Turned off 

・

Outside of the i-mode service area

・

Executing i-

α

ppli

・

During infrared communication

・

i-mode Lock is set

・

Self Mode is set 

・

There is no room left in the Message box due to unread or protected messages.

・

Using Voice Recorder when you set “reject” for “set call” in the Voice Recorder setting 

•

Press 

(cancel) to stop receiving Messages.

•

The Message ringtone sounds when download is completed.

•

Press a numeric key to stop the ringtone. (Alternatively, press 

, 

, 

,

or one of the Side keys to stop it.) The message reception screen remains
displayed.

•

No sound is heard when you set the phone to not play ringtones.

•

When mail and Message are received at the same time, only the mail ringtone
sounds.

•

Changing the Message ringtone (see p.118)

•

Changing the ringing duration time (see p.126)

While receiving
Messages

The display contents vary by the reception status.

Indicates the number of unread Messages. (The total of newly received Messages and
unread Messages that is already received.)

■

To read Messages right away

Proceed to 

Displaying new Messages (see p.309).

■

To read Messages later

Press 

(return). Open the Message from the Message box to read it (see p.312).

■

If you do not take any action

When a specified period elapses (ring time of Message ri 10 seconds
approx.), the message reception screen disappears and the Standby screen or
the screen that was displayed before the Message was received appears. In this
case, 

appears on the Standby screen. (If you displayed a new Message or

pressed 

(return), 

, or 

to close a message reception screen, 

does not appear.) 

appears until any of the following is performed:

•

Display the received mail or Messages* 

•

Display the Chat mail screen

•

Use the Check New Message function

•

Receive mail by Mail Optional Reception

•

Receive a new mail item or a Message

* The icon does not disappear in the following cases: 

・

When received mail is displayed using Jump Menu

・

When received mail is displayed using a mail interlocked type i-

α

ppli (It

disappears when you read or delete the mail.) 

・

When a Message is displayed by Auto Display (It disappears when you read
the Message.)

Message 
reception screen

appears when

there is new
messages

When a Message R is received

Example

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments