manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 142

140

Using

the
Camera

Function

S

till

Image

P

hotography

8

Taking Still Images (continued)

2

Select 20 or 4 shots to capture and press 

(select).

•

To disable Burst Mode, select “3. release burst mode”.

•

Select “4. back to normal” to cancel Burst Mode and Frame Shoot at the same time.

3

Select the burst speed and press 

(select).

Burst Mode is turned on.

1

In the Still Image Photography screen, select “burst mode” from the submenu.

•

Alternatively, you can press 

.

Turning Burst Mode on with the mova closed

Turning Burst Mode on with the mova open

1

In the Still Image Photography screen, select “burst mode” from the
photography menu.

•

To disable Burst Mode, select “release burst mode”.

•

Select “back to normal” to cancel Burst Mode and Frame
Shoot at the same time.

2

Use 

to specify how many still images to take (20 or 4 shots) and press

.

3

Use 

to specify the burst speed and press 

.

Burst Mode is turned on.

•

To return to the photography screen, press 

.

1

Point the camera at the subject and press 

for Close Shoot or 

(photo)

for Open Shoot.

•

In the auto mode, the burst shooting sound is emitted, and the shutter is pressed continuously.
When the burst shooting is finished, the captured still images are saved.

・

To stop the burst shooting, press 

in Close Shoot, or 

(cancel) in Open Shoot. The

still images captured are discarded.

•

In the manual mode, press 

or 

(photo) repeatedly. For each shooting the shutter

sound is played, and the Camera Status indicator turns red. When the burst shooting has been
finished, the captured still images are saved.

・

To stop the burst shooting, open the mova and press 

(COMP). The still images captured

up to that point are saved. 

・

To stop the burst shooting, press 

in Close Shoot, or 

(return) in Open Shoot. The still

images captured are discarded.

・

You can also switch between Open Shoot and Close Shoot during the burst shooting.

Taking still images

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands