Mova D506i, User Manual

Page: 607 / 644

605
Troubleshooting
E
rror
Messages
22
messages are left in
center
When appears, mail is saved at the
i-mode center because there is no
space in the Inmail box.
Read unread items (see p.346), delete
unnecessary items (see p.358), or
cancel the protection (see p.357). To
receive mail, perform Check New
Message (see p.338).
When or appears, Messages
are saved at the i-mode center
because there is no space in the
Message box.
Read unread Messages (see p.312),
delete unnecessary items (see p.315),
or cancel the protection (see p.314).
To receive Messages, perform Check
New Message (see p.311).
messages are full in
center When appears, there is no space in
the Inmail box. Since i-mode center
does not have space either, mail
cannot be retained.
Read unread items (see p.346), delete
unnecessary items (see p.358), or
cancel the protection (see p.357).
Then, perform Check New Message
(see p.338).
unable to copy selected
data Image data is corrupted or the format
cannot be handled by the mova.
−
unable to play selected
data Data size exceeds the maximum size
that can be played or the data is invalid.
−
selected data contents
are renewed The selected mail is overwritten by
newly received mail Try again.
unable to display
selected data The data size is greater than the
maximum size that can be displayed.
−
too much data to send The total data in the mail body and
melody exceeds the amount of data
that can be sent (500 bytes). Reduce the number of characters in
the mail body.
When or appears, there is no
space in the Message box. Since i-mode
center does not have space either,
Messages cannot be retained.
Read unread Messages (see p.312),
delete unnecessary items (see p.315),
or cancel the protection (see p.314).
Then, perform Check New Message
(see p.311).
Message Meaning Handling method
unable to send via
infrared selected data Still images that cannot be copied to
the built-in memory, also cannot be
performed Send Infrared Data.
−
unable to be best shot
selected data Still images that cannot be copied to
the built-in memory, also cannot be
performed Best Shot.
unable to send i-shot
selected data
Still images that cannot be copied to
the built-in memory, also cannot be
sent by i-shot transmission.
−
−
connection failed
time out
An error occurred during connection
with i-shot center. Send mail again in a location with
good signal conditions. If this message
appears again, wait for a while and
send again (see p.408).
The i-shot Host does not support i-shot. Set the host correctly or return to the
host set by default (see p.413).
When you perform Check New
Message with your mova closed, the
upper limit of the connection wait time
exceeded. Try again after moving to a location
inside the i-mode service area with
good signal conditions. If the message
appears again, wait for a while and try
again.