Mova D506i, User Manual

Page: 330 / 644

328
Using
the
Mail
Service
M
elody
M
ail
14
Melody Mail
Using i-mode Mail to Send Melodies
You can attach melodies to outgoing i-mode mail.
•
Maximum number of melodies that can be attached: 1 melody per mail item
•
You cannot attach restricted melodies. The patterns, sound effects, melodies preloaded in the
mova and corrupted melodies also cannot be attached to mail.
•
You can send mail of a total of 500 single-byte or 250 double-byte characters for the mail body
and melody data. Some melodies are too large to attach to mail.
•
i-mode compatible mobile phones that support Melody mail can receive mail with attached melodies.
Note, however, that phones other than the mova D506i may not be able to properly receive
melodies. The melody duration and the number of harmonic notes varies by the type of phone.
1
The list of melodies that can be sent via i-mode mail appears.
•
Alternatively, you can select “paste MEL” from the submenu to display the
melody list.
•
“(no title)” appears if a melody has no title.
•
If there are no melodies that could be sent, you cannot select “paste melody”.
■ To play back a melody
1
Select a melody, and select “play all” from the submenu.
•
To adjust the sound volume, press to select a volume level and
press (set).
•
To stop playback, press (stop).
•
A confirmation screen appears when Manner Mode or Drive Mode is
set. Select “YES” to play the melody.
■ To check melody information
1
Select a melody, and select “music INFO” from the submenu.
The title of the melody and a message indicating whether the melody can
be attached to mail appear.
2
Check the contents and press (OK).
In the compose mail screen, select the “paste” field and press (select),
and select “3.paste melody” and press (select).
2
The melody is attached and a melody title appears in the “paste ” field.
•
Attaching a melody to mail restricts the amount of available mail text space.
•
If the total amount of data including texts and melody data exceeds 500
single-byte or 250 double-byte characters, the message “too much data to
send” appears.
Decrease the number of text characters.
■ To release an attached melody
1
Select the “paste” field and press (select), and select “4. release
data” and press (select).
•
Alternatively, you can select “REL melody” from the submenu.
■ To check the attached melody information
1
Select the “paste” field and press (select), and select “5. data
information” and press (select).
•
Alternatively, you can select “data INFO” from the submenu.
2
Press (OK).
Select a melody and press (select).
3 Enter the recipient mail address, subject and mail text and send the mail.
•
Follow Steps 2 - 5 in Composing and Sending i-mode Mail (see p.322).
•
Even if you change the title with your mova, the melody is sent with the title used when the melody was
saved.
N o t e