manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 454

452

Voice Mail Service (continued)

Using

N

etwork

Services

17

Voice

M

ail

S

ervice

Setup

•

To connect an incoming call to the Voice Mail Service Center manually during i-mode
communication, select “answer” in the call reception setting (see p.299). 

Press

.

When 2nd call beep sounds during another call or a ringtone sounds
during i-mode communication, select “voice mail” from the submenu.

The received call is connected to the Voice Mail Service Center.

When incoming

A call received during another call or i-mode communication is connected
automatically to the Voice Mail Service Center.

When incoming

Connecting an incoming call to the Voice Mail Service Center manually

Connecting an incoming call to the Voice Mail Service Center automatically

To not connect an incoming call to the Voice Mail Service Center

■

The Voice Mail Service can be used temporarily when you cannot answer a call, even if
the service is not activated.

1

While the phone is ringing, select “voice mail” from the submenu.

The received call is connected to the Voice Mail Service Center. 

•

This operation does not activate the Voice Mail Service. Only this call is available.

■

When you are in a hurry and want to record a message, you can omit the answer message.

Pressing 

when the answer message is being played back switches to recording mode

message.

Setup

Press

.

When a call is received during another call or i-mode communication, the
caller hears a busy signal.

When incoming

Setup

Press

.

•

The 

, 

, and 

key sequences

are only available from your mova. A general subscriber phone or pay phone and other mobile phone
cannot be used.

•

The 2nd call beep is the same tone as that used for the Call Waiting Service, however, incoming calls
cannot be answered during another call if you do not subscribe to that service.

•

If you are calling 110, 119, 118, 117, or 14XX (Voice Mail Service operation, etc.), a call cannot be
connected manually to the Voice Mail Service Center.

•

While Keypad Lock is set, incoming calls cannot be connected manually to the Voice Mail Service
Center.

N o t e

•

Settings described below can also be performed from the menu (Select Second Call
Handling, see p.465):

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands