manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 203

201

Customizing

D

isplays

a

nd

Other

Indications

9

Set

S

tandby

Screen

Displaying an image of “camera album” or “import album”

You can set images such as still images taken with the camera or images downloaded
via i-mode that are stored in the built-in memory.

•

You cannot set an image if there are no images in the built-in memory.

•

You cannot set an image specified for Visual Partner or an image set as secret in the folder.

•

When you set an animation for the Standby screen, it is played when you open the mova.

•

When a Flash movie is set for the Standby screen, the first image is displayed and the image is played
back when the mova is opened. Playback ends when it comes to the end or no operation is performed for
about 75 seconds. After the playback, the image when playback ended is displayed until the mova is
closed, then opened again.

•

When the screen is switched such as when key is pressed during playback, the image is played back
from the beginning when returned to the Standby screen.

•

The sound effect of a Flash movie does not sound. You cannot perform operations in a Flash movie such
as item selection.

•

While in playback of animation or Flash movie, press 

or 

to end playback.

•

A saved Flash movie may be viewed differently from that displayed on a site.

•

You can set i-

α

ppli Standby screen from this Standby screen setting. In standby, select “customize”

“stand-by DSP”

“2. i-

α

ppli stand-by” from the menu. Following operations: Steps 2 and 3 in 

Setting the 

i-

α

ppli Standby Screen (see p.438).

•

Depending on the image to be set for the Standby screen or the status of the mova, it may take some time
for the Standby screen to appear. The black screen is displayed for the time.

N o t e

▲

▲

1

In standby, select “customize” 

“stand-by DSP” 

“1.stand-by image” 

“1.camera album” or “2.import album” from the menu.

The folder list appears.

•

Alternatively, you can select “setting” 

“screen

•

display” “stand-by 

DSP” “1. 

stand-by

image” 

“1. camera album” or “2. import album” from the menu.

•

Folders set as secret are not displayed.

2

Select a folder and then press 

(select).

The picture list or title list appears (see p.163).

■

To display image details

1

Select the desired image and select “image INFO” from the submenu.

2

Press (OK).

3

Select the desired image and then press 

(details).

▲

▲

▲

▲

▲

▲

▲

•

Pressing 

displays the next image. Pressing 

displays the previous

image. (You can also use 

or 

to select an image.)

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands