Mova D506i User Manual Download Page 622

Page: 622 / 644

620

Troubleshooting

Software

pdate

Updating the mova’s Software (continued)

Enter your 4-digit terminal ID number.

■

To change the updating date and time

Select “1. change” and press

(select).

A prompt appears asking whether to send your terminal ID.

Select “YES” and press

(select).

A confirmation screen for selecting date and time appears.

•

To cancel the operation, select “NO”.

Press (OK).

Select an updating date and press

(select).

Select an updating time slot and press

(select).

The updating date and time selection screen appears. The date and time slot list selected in
Steps

appear.

•

In the time slot list, available dates and times appear with symbols. By pressing

(explain), description for the symbols appear. Check the contents and press

(OK).

Select an updating date and time and press

(select).

A prompt appears.

•

Follow Steps 4 - 5 in

Updating software by reserving a date and time (see p.619).

■

To cancel the reserved updating date and time

Select “2. cancel” and press

(select).

A prompt appears.

Select “YES” and press

(select).

A prompt appears asking whether to send your terminal ID.

•

To cancel the operation, select “NO”.

Select “YES” and press

(select).

•

To cancel the operation, select “NO”.

Press (OK).

The reserved updating date and time appears.

•

To end the operation, select “3. end”.

In standby, select “setting”

“network service”

“software update” from

the menu.

▲

Checking, changing, and canceling a reserved updating date and time

▲

Press (OK).

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands