manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 281

279

Using

i-mode

to

G

et
Information

How

to

V

iew

a

nd

Use

S

ites

When information such as an image cannot be displayed correctly, you can reload the
contents.

•

If the Image Display setting is off, the images in the page cannot be displayed even if the page
is reloaded. Flash movies also cannot be displayed.

Reloading sites

1

Display the page you want to reload, and select “reload” from the submenu.

The page content is received.

•

When there are no images on the site, images are too
large to receive, or the images are in format that
cannot be displayed on your mova, images are not
displayed even if you reload the page.

•

When characters in pages are not displayed correctly,
changing the Character code may correct the
character display problem (see p.285).

When sites are displayed, your mova stores a log of the 20 most recent pages. This
allows you to move backward and forward through previously viewed pages.

•

When the log contains more than 20 items, the oldest page is overwritten by the new one.

Moving forward/backward through pages

1

To return to the previous page, press 

(return) or 

. Press 

to move

forward.

(return)

or 

(return)

or 

2 pages back

Previous page

Current page

appears in gray when
you cannot move further
back.

indicates you

can go back, and

indicates you

can go forward.

Items that store the log
or page contents are
displayed in different
colors. (The colors may
remain unchanged on
some sites.)

12

•

When the log and its contents are stored in memory, the page can be immediately displayed without
communicating with the i-mode center. Up to 20 pages can be retained in memory (the number of pages
that can be stored depends on the amount of information each page contains).

•

If you display pages in the order of A

→

B

→

C as shown on the right,

then return to A and finally move to D, the A

→

B

→

C path is deleted

and the new path A

→

D is stored in the log.

•

Some pages where a Flash movie is being displayed move backward
or forward in a different way.

•

When you disconnect i-mode, the logs are deleted.

N o t e

1

2

3

4

5

→

←

→

←

A

B

C

D

→

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands