Mova D506i, User Manual

Page: 438 / 644

436
Running an i-
α
ppli Program from a Site or Mail
Using
i-
p
pli
P
rograms
16
αα
16
i- α ppli To Function
i-
ppli
To
Function
i-
α
ppli To (link item for starting an i-
α
ppli program) can be selected to start an
application if a site, a Screen memo, or i-mode mail contains the link item.
•
i-
α
ppli To, the ability to start an i-
α
ppli program from i-mode mail, is a function provided by an
information provider in i-mode mail. This function cannot be used between movas.
•
Using the i-
α
ppli To setting, you can independently set whether individual applications are
started by the i-
α
ppli To function.
•
To start applications from i-mode mail, the i-
α
ppli Link function in the Mail Settings must be on.
•
You can also start up applications using Barcode Reader scan results and infrared
communication devices (see p.197, 476).
3 Select “1.yes” and press (select).
The application is set to start up with the i-
α
ppli To function.
•
To not use the i- α ppli To function, select “2. no”.
1
Select an i-
α
ppli To item from a site, Screen memo, or a mail item and press
(select).
A prompt appears asking whether to start the application.
•
When download or version upgrade is possible from a site, download automatically starts when
the application is not saved (see p.418). When an older version of an application is already
saved on your mova, a prompt appears. Select “YES” and press
(select) to start download.
2 Select “YES” and press (select).
The application starts up.
•
To cancel the operation, select “NO”.
1 Select an application in the software list, and select “separate” from the
submenu.
2
Select “2.i-
α
ppli To” and press (select).
[Set i-
α
ppli To]
Setting whether to use i-
α
ppli To function to start applications
[Application’s Default] yes
•
This setting cannot be made for an application that does not support the i- α ppli To function.