manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 437

•

When “set date-time” is selected, the setting returns to “none” when the specified start time passes.

•

Even when “none” is set, the date, time, and day of the week settings remain.

•

The setting is not canceled even if you change the Clock setting of your mova.

•

If you set Auto Start Time for an application that automatically starts via an application function, the
application starts at both times.

N o t e

435

Using

i-
p

pli

P

rograms

16

α

Auto-starting

a

n

i-
p

pli

P

rogram

•

When a start time arrives while the Standby screen or message reception screen is displayed, the
application starts automatically. The application does not start when the mova is turned off, during a call,
during i-mode communication, or during an operation. The application starts while an anniversary screen is
displayed or while an animation is displayed when the mova is opened. 

•

Applications also start while the i-

α

ppli Standby screen is displayed. Applications do not start automatically

when you press 

to display the application execution screen on the i-

α

ppli Standby screen.

•

In standby, the application does not start automatically in the following cases:

•

While i-mode Lock is set

•

While connected to an i-mode compatible car navigation system 

•

While Keypad Lock is set

•

While connected to a “PlayStation”

•

If more than one application starts on the same day and time, the application requiring a starting method
with the highest priority starts up:

•

When an application cannot be started automatically, 

appears in the software list.

•

When you set Network Transmission to “CFM every session” for an application that requires access to
your mova’s communication capability, if the application is started automatically, a prompt appears asking
whether to allow communication.

•

Applications run automatically even if your mova is closed.

About auto-starting an application

Priority order

High

Medium

Low

Auto-starting procedure

Start by Auto Start Time setting 

Start by application function (start time and time interval is set from within application)

Start by application function (starts at preset time interval)

α

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands