Mova D506i, User Manual

Page: 477 / 644

475
Using
Infrared
C
ommunication
S
ending/Receiving
All
D
ata
Items
18
7
Enter the 4-digit authentication password.
The data is sent.
•
Enter the same authentication password on the receiving side.
•
Entered numbers are masked with a series of “_”.
•
If you make a mistake, use to delete the “_” and reenter the correct one.
•
Data transmission is terminated when the authentication password does not match the
receiving side.
•
If the password is not entered within about 15 seconds, the Standby screen appears
automatically. Repeat the operation from the beginning.
•
The authentication password between 0000 and 9999 can be entered. “#” and “ ” cannot be
used.
•
While the data is sent, press (cancel) to cancel the operation.
1 In standby, select “useful function” “receive via IR” “2.receive all”
from the menu.
▲ ▲
[Receive All Infrared Data]
Receiving all data items
When receiving all data items is performed, all saved data is overwritten by the
received data. So, perform carefully. Even if receiving is interrupted in the middle, the
deleted data cannot be restored.
•
This also applies to protected data and others stored in Secret memory.
2 Select “YES” and press (select).
•
To cancel the operation, select “NO”.
•
All infrared data items cannot be sent to the infrared communication devices that cannot perform the
authentication using a password.
N o t e
6 Enter your 4-digit terminal ID number.
The authentication password entry screen appears.
3
Select “send via IR” from the submenu.
4 Select “2.send all” and press (select).
5
Select “YES” and press (select).
•
To cancel the operation, select “NO”.
3
Enter your 4-digit terminal ID number.
The authentication password entry screen appears.
M6 42
▲