Mova D506i User Manual Download Page 184

Page: 184 / 644

182

Using

the

Camera

Function

Playing Back Video Clips You Took

My Picture Video Playback

Picture

Video

Playback

You can playback the video clip you took with the camera and saved in “movie album”
of My Picture.

In standby, select “useful function”

“My picture” from the menu.

•

Alternatively, you can use the following ways: The folder list appears. Proceed to Step 3.

・

In standby, press

and select “movie album”.

・

In standby, select “camera”

“movie album” from the menu.

・

In standby, select “data box”

“2. movie album” from the menu.

・

In the Video Photography screen of camera, press

or select “movie album” from the

submenu.

▲

Select “2.movie album” and press

(select).

The number of
video clips in
folder

The folder list appears.

■

To display video clips saved in the

Memory Stick Duo

Press .

• Each time

is pressed, the folder list of the built-in memory and that

of the

Memory Stick Duo are toggled.

• During Memory Stick Lock, enter 4-digit terminal ID number.
• For details about operating video clips saved in the

Memory Stick Duo,

see p.494.

■

To display a list of video clips in all folders

Select “log” from the submenu.

• Enter your 4-digit terminal ID number when there are folders set as

secret.

• Press

(return) to return to the folder list.

Select a folder and press

(select).

The picture list or title list appears (see p.184).

•

When the selected folder is set as secret, enter your 4-digit terminal ID
number.

Select a video clip and press

(details).

The video clip appears.

•

Pressing

displays the next video clip. Pressing

displays the

previous one.

■

To change the display size of a video clip (Default: zoom display)

Select “zoom display” or “standard” from the submenu.

■

To adjust the sound volume (Default: level 4)

Use

to select a proper volume.

After the 2 seconds, or by pressing

(set), it returns to the video

display screen.
• You can also adjust the volume while playing back a video clip.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Brands by name

Popular brands