manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 478

476

Using

Infrared

C

ommunication

Sending/Receiving

A

ll

Data

Items

/Infrared

Communication

Mode

18

4

Enter the 4-digit authentication password.

The phone is now ready to receive data.

•

Enter the same authentication password on the sending side.

•

Entered numbers are masked with a series of “_”.

•

If you make a mistake, use 

to delete the “_” and reenter the correct one.

•

Data reception is terminated when the authentication password does not match the sending
side.

•

If the password is not entered within about 15 seconds, the Standby screen appears
automatically. Repeat the operation from the beginning.

•

The authentication password between 0000 and 9999 can be entered. “#” and “

” cannot be

used.

Infrared Communication Mode

Engaging the Infrared Communication Mode

i-

α

ppli start data can be received to execute i-

α

ppli applications from infrared

communication devices that have an i-

α

ppli start function.

•

The application that is started up is determined by the infrared communication device with the 
i-

α

ppli start function. The specified application must be downloaded from a i-mode site (see p.418).

•

The application cannot be started up while i-mode Lock is set.

1

In standby, select “useful function” 

“receive via IR” 

“1.receive” from

the menu.

▲

▲

3

Operate the infrared communication device to send i-

α

ppli start data.

i-

α

ppli start data is received and the application starts.

•

Operations after start vary by the application.

•

When i-

α

ppli start data is not received within about 60 seconds after “YES” is selected, the

Standby screen appears.

•

When the maximum number of data items that can be saved reached or there is not enough free space to
save, only data that can be saved is stored in the mova.

•

When there is data that cannot be handled by the mova in received data, only normal data is saved.

•

When reception is interrupted in the middle, only data that was normally received is saved.

•

Depending on the infrared communication devices of sending side, the mova may stay in standby though all data has
been sent.

Pressing 

(cancel) ends the connection.

•

All infrared data items cannot be received from the infrared communication devices that cannot perform the
authentication using a password.

N o t e

2

Select “YES” and press 

(select).

The phone is now ready to receive i-

α

ppli start data.

•

To cancel the operation, select “NO”.

Sending/Receiving All Data Items (continued)

5

Operate the sending device to send the data.

Data is received.

•

When data is not sent within about 60 seconds after entering the authentication password, the
Standby screen appears.

•

You can stop receiving data by pressing 

(cancel)  while in standby or during receiving.

M6 41

▲

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands