Mova D506i User Manual Download Page 621

Page: 621 / 644

619

Troubleshooting

Software

pdate

Select “2.reserve” and press

(select).

The update date and time selection screen appears.

•

To cancel the operation, select “3. no update”.

•

Press

(cancel) while

appears, a prompt appears asking whether to end the

operation. To end the operation, select “YES” and press

(select).

The server time appears.
If 24h is set in Standby screen, the time
appears in the 24-hour system.

When selected to cancel the operation, a
prompt appears. To end the operation, select
“YES” and press

(select).

A prompt appears.

■

To update at the date and time other than the displayed one

Select “another date-time” and press

(select).

A confirmation screen for selecting date and time appears.

Press (OK).

Select the date of updating and press

(select).

Select an update time slot and press

(select).

The updating date and time selection screen reappears. The date and
time slot list selected in Steps

appear.

•

In the time slot list, available dates and times appear with symbols. By
pressing

(explain), description for the symbols appear. Check the

contents and press

(OK).

Select an updating date and time and press

(select).

A prompt appears.

•

Proceed to Step 4.

Select an updating date and time and press

(select).

Select “YES” and press

(select).

The selected date and time is reserved.

•

To cancel the operation, select “NO”.

•

Press

(cancel) while

appears, a prompt appears asking whether to end the

operation. To end the operation, select “YES” and press

(select). (Depending on the timing

of pressing

(select), it may not be canceled.)

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Mova D506i, User Manual, Page: 621 / 644

Search results

Summary of Contents for D506i

Reviews: