manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 196

194

Using

the
Camera

Function

8

Using Barcode Reader (continued)

Barcode

R

eader

A concatenated QR code represents a single data item with two or more QR
codes. D506i supports scanning of a concatenated QR code consisting of up
to 16 QR codes.
After scanning the first QR code, the screen shown in the left figure appears.

1

Press 

to scan the next QR code.

• Repeat this until all codes of the concatenated QR code are scanned.
• When you have scanned the same QR code twice, “already scanned,

scan next bar code” is displayed. Press 

and scan the appropriate

QR code.

• If a code cannot be scanned within 30 seconds, “could not scan, scan

next bar code” appears and scanning stops. Press 

to retry

scanning.

• If you attempt to end Barcode Reader while one or more concatenated

QR codes are being scanned, a prompt appears. To cancel the scan, use

to select “YES” and press 

. To continue the scan, select “NO”.

Alternatively, you can do this by opening the mova and select “YES” or
“NO” and press 

(select).

• Similarly, a prompt appears when there is no operation for about 3

minutes.

• While scanning the concatenated QR code, you cannot perform

switching to the Still Image/Video Photography screens.

■

To scan a concatenated QR code

6

Open the mova.

Scan results appear on the main display.

•

You can save scan results for later use (see p.197).

•

The screen shown on the left is an example of scanned results. This is
different from the scanned results of the barcode example in p.192.

Remaining
unscanned
codes/total
number of
codes

When entering characters into an input field in a site or Screen Memo, you can scan the barcode and enter
the scan result.

1

Select an input field from a site or Screen Memo and press 

(select).

2

Move the cursor to the position where you want to enter scan results.

3

Press 

(special), select “14. bar code reader” and press 

(select).

4

Start code scanning.

If you open the mova after scanning is completed, the scanned characters are input.

•

Data other than characters are replaced by spaces.

•

To end Barcode Reader, open the mova and press 

(stop). Pressing 

does not end it.

Using Barcode Reader while viewing a site

•

During code scanning, the character set in Set Partner is not displayed. (Instead, “no setting” screen
appears.)

N o t e

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands