Mova D506i User Manual Download Page 268 | Manualshive

Page: 268 / 644

background image

266

Using

i-mode

to

G

et
Information

12

What is i-mode?

What

is
i-mode?

i-mode subscribers can use an i-mode compatible mobile phone to access online
services such as displaying i-mode sites, connecting to the Internet, and sending and
receiving i-mode mail.

■

i-mode site (program) connection (see p.267)

Simple key operations are used to navigate through i-mode sites offered by information providers.

■

Internet connection (see p.269)

i-mode subscribers can access and view i-mode compatible Internet web sites using their i-mode
compatible mobile phones.

■

i-mode mail (see p.318)

i-mode subscribers can also send and receive email through the Internet using their i-mode
compatible mobile phones.

■

The i-mode service is optional (charged) and requires a subscription.

Provides sites (programs).

i-mode compatible mobile phone

i-mode center

i-mode service area

Internet

Connects the information
provider and i-mode compatible
mobile phone. Also retains mail
and Messages.

The i-mode service area is
almost similar to the service
area for phone calls.

Information provider

PC, etc.

How the service works

•

i-mode service charges are based on the amount of information (number of packets) that are sent and received.
Information about charges is not discussed in this manual. For additional information related to i-mode charges
etc., see the “i-mode User’s Manual” that is provided when you subscribe to i-mode service.

•

The displayed contents may be changed or updated as the service contents changes; be sure to check the
latest “i-mode User’s Manual” for the most up-to-date information.

For inquiries (in English)

For inquiries (in Japanese only)

No prefix

151

(toll free)

*

Can only be called from DoCoMo mobile phones and PHSs

0120-005-250

(toll free)

*

Can be called from mobile phones and PHSs

0120-800-000

(toll free)

*

Can be called from mobile phones and PHSs

*Please confirm the phone number before you dial.

«
...
266
267
268
269
270
...
»

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for D506i

Brand: Uniden Pages: 16

Brand: Haier Pages: 57

Brand: Sagem Pages: 72

Brand: Sagem Pages: 63

Brand: Sagem Pages: 77

Brand: TCL Pages: 52

Brand: Verykool Pages: 23

Brand: Samsung Pages: 108

Brand: Alcatel Pages: 44

Brand: UMX Pages: 22

Brand: Yealink Pages: 4

Brand: Fisher-Rosemount Pages: 116

Brand: Fortinet Pages: 28

Brand: NEG Pages: 10

Brand: HTC Pages: 310

Brand: Alcatel Pages: 2

Brand: Evolveo Pages: 23

Brand: Intelbras Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands