manualshive.com logo in svg

Mova D506i, User Manual, Page: 122 / 644

Share
Download
Mova D506i User Manual Download Page 122

120

Changing

the

R

ingtone

S

et
Sound

7

Changing the mova Ringtones (continued)

•

When a call is received, the ringtones are heard in the following order of precedence:
1. Direct number setting (Number Plus Service, etc.) ringtone
2. User unsent tone, not supported tone, payphone tone
3. Ringtone selected for each person in the Phonebook (when the Caller ID is notified)
4. Group setting ringtone (when the Caller ID is notified)
5. Forwarding tone (when the Voice Mail Service or Call Forwarding Service is activated)
6. Ringtone (“ring tone” set in the sound setting)
While in Keypad Lock, however, the ringtone set in the sound setting sounds.

•

When mail is received, the mail ringtones are heard in the following order of precedence:
1. Chat ring tone (for chat mail only)
2. Mail ringtone selected for each person in the Phonebook
3. Group setting mail ringtone
4. Mail ringtone (“mail ring tone” set in the sound setting)
While in Keypad Lock, however, the “mail ringtone” set in the sound setting sounds. Even while in Keypad
Lock, the chat ringtone sounds when chat mail is received.

•

Even if a call or mail is received from a party listed in a group, the designated ringtone or mail ringtone by
group does not play when Phonebook Access Lock or Keypad Lock is set, or when the other party is
saved in Secret memory.

When the ringtone is set

•

Melodies other than those preloaded by default can be used as the ringtone; however if they are deleted,
the preloaded melodies are used.

N o t e

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments