Mitsubishi Electric FR-A800, Instruction Manual

Page: 369 / 1042

Parameters (E) Environment setting parameters
FR-A800 5 - 189
5.7 (E) Environment setting parameters
Purpose Parameter to set
Refer to
page
To set the time Real time clock function P.E020 to P.E022 Pr. 1006 to Pr. 1008 5-190
To set a limit for the reset function.
To shut off output if the operation panel
disconnects.
To force deceleration to a stop on the
operation panel.
Reset selection/
disconnected PU
detection/PU stop
selection/Reset limit
P.E100 to P.E102,
P.E107
Pr. 75 5-192
To select the display language of the
parameter unit PU display language
selection
P.E103 Pr. 145 5-196
To control the buzzer of the parameter
unit and operation panel
PU buzzer control P.E104 Pr. 990 5-196
To adjust the LCD contrast of the
parameter unit
PU contrast adjustment P.E105 Pr. 991 5-196
To turn OFF the operation panel when
not using it for a certain period of time
Display-off mode P.E106 Pr.1048 5-197
To use the USB memory USB host reset P.E110 Pr. 1049 5-197
To use the setting dial of the operation
panel like a potentiometer to set the
frequency.
To disable the operation panel.
Operation panel
operation selection
P.E200 Pr. 161 5-198
To change the frequency change
increments which changes when using
the setting dial of the operation panel
Frequency change
increment amount setting
P.E201 Pr. 295 5-200
To use the regeneration unit to increase
the motor braking torque Regenerative brake
selection
P.E300, P.G107 Pr. 30, Pr. 70 5-675
To change the overload current rating
specification
Multiple rating setting P.E301 Pr. 570 5-201
To input a voltage between 480 V and
500 V Input voltage mode
selection
P.E302 Pr. 977 5-203
To prevent parameter rewriting
Parameter write disable
selection
P.E400 Pr. 77 5-203
To restrict parameters with a password Password function P.E410, P.E411 Pr. 296, Pr. 297 5-207
To use parameters freely Free parameter P.E420, P.E421 Pr. 888, Pr. 889 5-211
To change parameter settings for an IPM
motor as a batch IPM parameter
initialization
P.E430 Pr. 998 5-71
To set multiple parameters as a batch
Automatic parameter
setting
P.E431 Pr. 999 5-211
To display the required parameters
Applicable parameter
display and user group
function
P.E440 to P.E443
Pr. 160,
Pr. 172 to Pr. 174
5-216
To release the parameter copy warning
(CP) Parameter copy alarm
release
P.E490 Pr. 989 5-702
To reduce the motor noise and EMI
PWM carrier frequency
changing
P.E600 to P.E602
Pr. 72, Pr. 240,
Pr. 260
5-219
To understand the maintenance time of
inverter parts and peripheral device
Inverter parts life display P.E700 to P.E704 Pr. 255 to Pr. 259 5-222
Maintenance output
function
P.E710 to P.E715
Pr. 503, Pr. 504,
Pr. 686 to Pr. 689
5-227
Current average value
monitor signal
P.E720 to P.E722 Pr. 555 to Pr. 557 5-229