Mitsubishi Electric FR-A800, Instruction Manual

Page: 776 / 1042

(A) Application parameters Parameters
5 - 596
Digital source (monitored item) selection
Select the digital sources (input/output signals) to be set to Pr. 1038 to Pr. 1045 from the table below.
When a value other than the below, 0 (OFF) is applied for display.
Trigger setting (Pr. 1025, Pr. 1035 to Pr. 1037, Pr. 1046, Pr. 1047)
●
Set the trigger generating conditions and trigger target channels.
Setting value Signal name Remarks Setting value Signal name Remarks
0 — — 101 RUN
For the details of the
signals, refer to
page 5-361.
1 STF
For the details of the
signals, refer to
page 5-422.
102 SU
2 STR 103 IPF
3 AU 104 OL
4 RT 105 FU
5 RL 106 ABC
6 RM 107 ABC2
7 RH 121 DO0
For the details of the
signals, refer to the
Instruction Manual of
FR-A8AY (option).
8 JOG 122 DO1
9 MRS 123 DO2
10 STP (STOP) 124 DO3
11 RES 125 DO4
12 CS 126 DO5
21 X0
For the details of the
signals, refer to the
Instruction Manual of
FR-A8AX (option).
127 DO6
22 X1 128 RA1 For the details of the
signals, refer to the
Instruction Manual of
FR-A8AR (option).
23 X2 129 RA2
24 X3 130 RA3
25 X4
26 X5
27 X6
28 X7
29 X8
30 X9
31 X10
32 X11
33 X12
34 X13
35 X14
36 X15
37 DY
Tab. 5-257: Digital source (monitored item) selection
Pr. 1025
setting
Trigger generating conditions
Selection of trigger
target channel
0
Trace starts when inverter enters an fault status (protective function
activated)
—
1 Trace starts when analog monitor satisfies trigger conditions Pr. 1035
2 Trace starts when digital monitor satisfies trigger conditions Pr. 1046
3
Trace starts when either of analog or digital monitor satisfies trigger
conditions (OR)
Pr. 1035, Pr. 1046
4
Trace starts when both of analog or digital monitor satisfies trigger conditions
(AND)
Pr. 1035, Pr. 1046
Tab. 5-258: Trigger setting