Mitsubishi Electric FR-A800, Instruction Manual

Page: 624 / 1042

(C) Motor constant parameters Parameters
5 - 444
Setting
●
To perform tuning, set the following parameters about the motor.
Differs according to the voltage class. (200 V/400 V)
For the settings for the SF-V5RU refer to page 2-74.
According to the Pr. 71 setting, the range of the motor constant parameter setting values and units
can be changed. Set the Pr. 71 "Applied motor setting" according to the motor to be used and the
motor constant setting range. (For other setting values of Pr. 71, refer to page 5-434.)
First
motor Pr.
Second
motor Pr.
Name Initial value Description
80 453 Motor capacity 9999 (V/F control) Set the motor capacity (kW).
81 454
Number of motor
poles
9999 (V/F control) Set the number of motor poles (2 to 12).
800 451
Control method
selection
20
Set this parameter when using vector control or Real
sensorless vector control.
9 51
Electronic thermal O/L
relay Rated inverter
current
Set the rated motor current (A).
83 456 Rated motor voltage
200 V/400 V
Set the rated motor voltage (V) printed on the
motor's rating plate.
84 457
Rated motor
frequency
9999
Set the rated motor frequency (Hz).
When the setting is "9999", the Pr. 3 "Base frequency"
setting is used.
71 450 Applied motor
0 (standard
motor)
Set this parameter according to the motor.
Three types of motor constant setting ranges, units
and tuning data can be stored according to settings.
96 463
Auto tuning setting/
status
0
Set "1" or "101".
1: Performs tuning without rotating the motor.
(Excitation noise occurs at this point.)
101: Performs tuning without rotating the motor.
The motor can rotate up to the speed near the rated
motor frequency.
Tab. 5-174: Set the parameters before performing tuning