Mitsubishi Electric FR-A800, Instruction Manual

Page: 544 / 1042

(M) Monitor display and monitor output signal Parameters
5 - 364
49 149 Y49
During pre-charge
operation
Output during pre-charge operation.
Pr. 127 to
Pr. 134, Pr. 241,
Pr. 553, Pr. 554,
Pr. 575 to
Pr. 577, Pr. 753
to Pr. 769, C42
to C45
5-547
50 150 Y50
During second pre-
charge operation
51 151 Y51 Pre-charge time over
Output when the pre-charge operation
reaches the time limit set in Pr. 764 or Pr.
769.
52 152 Y52
Second pre-charge time
over
53 153 Y53 Pre-charge level over Output when the measured value before
reaching the ending time during pre-
charge operation is higher than the
detection level set in Pr. 763 or Pr. 768.
54 154 Y54
Second pre-charge level
over
55 155 Y55
Motor temperature
detection
(for FR-A8AZ)
,
Output when the temperature of the
vector control dedicated motor with
thermistor (SFV5RU
첸첸첸첸첸
T/A)
exceeds the detection level.
Pr. 750 —
56 156 ZA
Home position return
failure Output while a home position return
failure warning is occurring.
⎯
5-132
57 157 IPM
During PM sensorless
vector control Output while the control method is PM
sensorless vector control. Pr. 71, Pr. 80,
Pr. 998
5-70
60 160 FP Position detection level
Output when the current position
exceeds the position detection judgment
value (Pr. 1294 and Pr. 1295).
Pr. 1294 to
Pr. 1297
5-179
61 161 PBSY
During position
command operation Output during position command
operation.
⎯
5-132
63 163 ZP
Home position return
completed Output after home position return is
completed.
64 164 Y64
Control circuit capacitor
life
Output during retry processing. Pr. 65 to Pr. 69 5-307
67 167 Y67
Power failed signal
Output when the output is shut off due
to power failure or undervoltage, or the
power failure time deceleration-to-stop
function is activated.
Pr. 261 to
Pr. 266
5-580
68 168 EV
24 V external power
supply operation
Output while operating with a 24 V
power supply input from an external
source.
⎯
2-51
70 170 SLEEP PID output interruption
Output during PID output suspension
function operation.
Pr. 127 to
Pr. 134, Pr. 575
to Pr. 577
5-524
79 179 Y79
Pulse train output of
output power
Output in pulses every time the
accumulated output power of the
inverter reaches the Pr. 799 setting.
Pr. 799 5-386
84 184 RDY
Position control
preparation ready
#
Output when the operation is set ready
by servo ON (LX ON)
Pr. 419,
Pr. 428 to
Pr. 430
5-170
85 185 Y85 DC current feeding
,
Output when there is a power failure or
undervoltage for the AC current.
Pr. 30 5-675
86 186 Y86
Control circuit capacitor
life
(for FR-A8AY, FR-A8AR)
#
Output when the control circuit capacitor
approaches the end of its life.
Pr. 255 to
Pr. 259
5-222
87 187 Y87
Main circuit capacitor life
(for FR-A8AY, FR-A8AR)
# ,
Output when the main circuit capacitor
approaches the end of its life.
88 188 Y88
Cooling fan life
(for FR-A8AY, FR-A8AR)
#
Output when the cooling fan approaches
the end of its life.
89 189 Y89
Inrush current limit circuit
life
(for FR-A8AY, FR-A8AR)
# ,
Output when the inrush current limit
circuit approaches the end of its life.
90 190 Y90 Life alarm
Output when any of the control circuit
capacitor, main circuit capacitor and
inrush current limit circuit or the cooling
fan approaches the end of its life.
91 191 Y91
Fault output 3(power-OFF
signal) Output when an error occurs due to an
inverter circuit fault or connection fault.
⎯
5-372
Setting
Signal
name
Function Operation
Related
parameter Refer to
page
Positive
logic
Negative
logic
Tab. 5-140: Output terminal function assignment (3)