Remove 2 sets of allen screws
A & B.
Note:
One bolt
“A” is longer and has a step on the bottom shoulder.
1
install 443-IS
912-A Pancho Road • Camarillo, CA 93012
Tel: 800-345-9791
Fax: 805-388-8285
Here’s the retention clips location after pulling the side
fairing off. Outline in white boxes.
Caution:
Electrical
wires are connected to the side fairing.
Helpful hints:
Use metric tools, clean hands, put the bike on a center stand. Do not pry on the screen excessively, as it will
break without much warning.
Honda CBR250R (11-12) DIY Windscreen Install
Installation Manual for Honda CBR250R
Thank you for purchasing Zero Gravity windscreen, which has
been designed and manufactured to give years of safe & fun rid-
ing. These instructions give you an in-depth look at the
installation process
. To receive further assistance or parts, please call Zero
Gravity
®
Sales Department at 805-388-8803 or E-mail at
.
PLEASE READ BEFORE
MOUNTING YOUR WINDSCREEN
Remove Side Fairing (For both sides)
Pulling the Side Fairing / Retention Clip Locations
Overview of screen and exploded view of assembly. It
might be a good idea to go get a 2nd helper with the
install. Remove side mirrors, set aside.
Removing Factory Screen Over View / Remove side mirrors
A
B
Here’s the side fairing screw location, there are two
more locations after this.
Note:
B
screws are used.
Side Fairing Screw Locations Part 1 of 3
Here’s the bottom of the bike, side fairing screw loca-
tion. There is one more location after this.
Note:
B
screws are used.
Side Fairing Screw Locations Part 2 of 3
Here’s the inner front cowl of the bike, side fairing
screw location.
Note:
A
screw is used.
Side Fairing Screw Locations Part 3 of 3
