912-A Pancho Road • Camarillo, CA 93012
Tel: 800-345-9791
Fax: 805-388-8285
Honda CBR250R (11-12) DIY Windscreen Install
6
install 443-IS
Once removed look at
OVERVIEW 1 of 2
image and remove the screws. Then carefully pop these out, outlined in white cir-
cle and replace it with a Zero Gravity Windscreen. Follow the instructions carefully in reverse, there are a few steps
below to guide with the install.
Front Face Removal
Please see www.zerogravity-racing.com for
further information concerning this product.
Special Note: Sport Touring Windscreen
Brake lever position, factory setting should
not become a problem. Altered brake lever
position may cause contact with the wind-
screen at a full left turn.
Sport Touring Windscreen Disclaimer
LEFT IMAGE:
Shows after the gauge is in place to
compress the gauge to the upper fairing to seat cor-
rectly.
RIGHT IMAGE:
After the gauge is compressed, apply
pressure to the thumb and press to snap in the gauge
cluster.
FRONT BIKE
Gauge Install & Clip Snap
