Mitsubishi Electric FR-A800, Instruction Manual

Page: 217 / 1042

FR-A800 5 - 37
Parameters Parameter List
(D) Operation command and frequency command
Parameters that specify the inverter's command source,
and parameters that set the motor driving frequency and
torque.
F022 147
Acceleration/deceleration time
switching frequency
5-233
F030 110 Third acceleration/deceleration time 5-233
F031 111 Third deceleration time 5-233
F040 1103
Deceleration time at emergency
stop
5-233
F070 791
Acceleration time in low-speed
range
5-233
F071 792
Deceleration time in low-speed
range
5-233
F100 29
Acceleration/deceleration pattern
selection
5-240
F101 59 Remote function selection 5-247
F102 13 Starting frequency
5-251,
5-253
F103 571 Holding time at a start 5-251
F200 140
Backlash acceleration stopping
frequency
5-240
F201 141 Backlash acceleration stopping time 5-240
F202 142
Backlash deceleration stopping
frequency
5-240
F203 143 Backlash deceleration stopping time 5-240
F300 380 Acceleration S-pattern 1 5-240
F301 381 Deceleration S-pattern 1 5-240
F302 382 Acceleration S-pattern 2 5-240
F303 383 Deceleration S-pattern 2 5-240
F400 516
S-pattern time at a start of
acceleration
5-240
F401 517
S-pattern time at a completion of
acceleration
5-240
F402 518
S-pattern time at a start of
deceleration
5-240
F403 519
S-pattern time at a completion of
deceleration
5-240
F500 292 Automatic acceleration/deceleration
5-255,
5-260,
5-484
F510 61 Reference current
5-255,
5-260
F511 62 Reference value at acceleration 5-255
F512 63 Reference value at deceleration 5-255
F513 293
Acceleration/deceleration separate
selection
5-255
F520 64
Starting frequency for elevator
mode
5-260
Pr.
group
Pr. Name
Refer to
page
Tab. 5-7: Setting of acceleration/deceleration time
and acceleration/deceleration pattern (2)
Pr.
group
Pr. Name
Refer to
page
D000 79
Operation mode selection
5-263,
5-272
D001 340
Communication startup mode
selection
5-272
D010 338
Communication operation
command source
5-274
D011 339
Communication speed command
source
5-274
D012 550
NET mode operation command
source selection
5-274
D013 551
PU mode operation command
source selection
5-274
D020 78
Reverse rotation prevention
selection
5-281
D030 811 Set resolution switchover
5-84,
5-324
D100 291 Pulse train I/O selection
5-282,
5-341
D101 384 Input pulse division scaling factor 5-282
D110 385 Frequency for zero input pulse 5-282
D111 386 Frequency for maximum input pulse 5-282
D200 15 Jog frequency 5-286
D300 28
Multi-speed input compensation
selection
5-288
D301 4
Multi-speed setting (high speed)
5-288
D302 5
Multi-speed setting (middle speed)
5-288
D303 6
Multi-speed setting (low speed)
5-288
D304 to
D307
24 to 27
Multi-speed setting
(4 speed to 7 speed)
5-288
D308 to
D315
232 to
239
Multi-speed setting
(8 speed to 15 speed)
5-288
D400 804 Torque command source selection
5-84,
5-132
D401 805 Torque command value (RAM)
5-84,
5-132
D402 806
Torque command value (RAM,
EEPROM) 5-84,
5-132
D403 1114 Torque command reverse selection 5-132
Tab. 5-8: Operation command and frequency
command
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple