Mitsubishi Electric FR-A800, Instruction Manual

Page: 395 / 1042

Parameters (E) Environment setting parameters
FR-A800 5 - 215
GOT initial setting (RS-485 terminals) (Pr. 999 = "11, 13")
When Pr. 414 = "1", the setting value is not changed.
●
Initial setting with the GOT2000 series
– When "FREQROL 500/700/800, SENSORLESS SERVO" is selected for "Controller Type" in the GOT
setting, set Pr. 999 = "11" to configure the GOT initial setting.
– When "FREQROL 800(Automatic Negotiation)" is selected for "Controller Type" in the GOT
setting, the GOT automatic connection can be used. When "FREQROL 800(Automatic Negoti-
ation)" is selected for "Controller Type" in the GOT setting and the GOT automatic connection
is not used, set Pr. 999="13" to configure the GOT initial setting. (Refer to page 5-649 .)
●
Initial setting with the GOT1000 series
– Set Pr. 999 = "10" to configure the GOT initial setting.
Pr. Name
Initial
value
Pr. 999 = "11" Pr. 999 = "13" Refer to page
79 Operation mode selection 0 0 1 5-263
332 RS-485 communication speed 96 192 1152
5-610
333 RS-485 communication stop bit length 1 10 0
334
RS-485 communication parity check
selection
2 1 1
335 RS-485 communication retry count 1 9999 9999
336
RS-485 communication check time
interval
0 s 9999 9999
337
RS-485 communication waiting time
setting
9999 0 ms 0 ms
340 Communication startup mode selection 0 1 1 5-272
341 RS-485 communication CR/LF selection 1 1 1 5-610
414 PLC function operation selection 0 —
2
5-587
549 Protocol selection 0 0 0 5-630
Tab. 5-84: GOT initial setting (RS-485 terminals)
NOTES Always perform an inverter reset after the initial setting.
For the details of connection with GOT, refer to the Instruction Manual of GOT.