Mitsubishi Electric FR-A800, Instruction Manual

Page: 228 / 1042

Parameter List Parameters
5 - 48
Setting can be made only when a vector control compatible option is mounted.
Setting can be made only when the FR-A8AP is mounted.
The setting is available only when the FR-A8AP or the FR-A8APR is mounted.
#
The setting is available only when the FR-A8TP is mounted.
,
The setting is available only when the FR-A8AP or the FR-A8TP is mounted.
$
The parameter number in parentheses is the one for use with the LCD operation panel (FR-LU08) and the parameter
unit (FR-PU07).
%
Setting can be made only for the standard model.
&
Setting can be made only for the standard model and the IP55 compatible model.
+
The setting is available only with the 400 V class.
G132 662
Increased magnetic excitation
current level
5-689
G200 800 Control method selection 5-56
G203 245 Rated slip 5-691
G204 246 Slip compensation time constant 5-691
G205 247
Constant-power range slip
compensation selection
5-691
G206 1116
Constant output range speed
control P gain compensation
5-97
G210 803
Constant output range torque
characteristic selection 5-84,
5-132
G211 820 Speed control P gain 1 5-97
G212 821 Speed control integral time 1 5-97
G213 824
Torque control P gain 1 (current loop
proportional gain)
5-144
G214 825
Torque control integral time 1
(current loop integral time)
5-144
G215 823 Speed detection filter 1 5-186
G216 827 Torque detection filter 1 5-186
G217 854 Excitation ratio 5-187
G218 1115
Speed control integral term clear
time
5-97
G220 877
Speed feed forward control/model
adaptive speed control selection 5-109
5-181
G221 878 Speed feed forward filter 5-109
G222 879 Speed feed forward torque limit 5-109
G223 881 Speed feed forward gain 5-109
G224 828 Model speed control gain 5-109
G230 840 Torque bias selection 5-113
G231 841 Torque bias 1 5-113
G232 842 Torque bias 2 5-113
G233 843 Torque bias 3 5-113
G234 844 Torque bias filter 5-113
G235 845 Torque bias operation time 5-113
G236 846 Torque bias balance compensation 5-113
G237 847 Fall-time torque bias terminal 1 bias 5-113
G238 848 Fall-time torque bias terminal 1 gain 5-113
G240
367
Speed feedback range 5-692
G241
368
Feedback gain 5-692
Pr.
group
Pr. Name
Refer to
page
Tab. 5-16: Control Parameter (2)
G250 788
Low speed range torque
characteristic selection
5-75
G260 1121
Per-unit speed control reference
frequency
5-97
G261 1117
Speed control P gain 1 (per-unit
system)
5-97
G262 1119
Model speed control gain (per-unit
system)
5-109
G300 451
Second motor control method
selection 5-56,
5-147
G311 830 Speed control P gain 2 5-97
G312 831 Speed control integral time 2 5-97
G313 834 Torque control P gain 2 5-144
G314 835 Torque control integral time 2 5-144
G315
833
Speed detection filter 2 5-186
G316 837 Torque detection filter 2 5-186
G350 747
Second motor low-speed range
torque characteristic selection
5-75
G361 1118
Speed control P gain 2 (per-unit
system)
5-97
G400 286 Droop gain 5-695
G401 287 Droop filter time constant 5-695
G402 288 Droop function activation selection 5-695
G403 994 Droop break point gain 5-695
G404 995 Droop break point torque 5-695
G410 653 Speed smoothing control 5-699
G411 654 Speed smoothing cutoff frequency 5-699
G420 679 Second droop gain 5-695
G421 680 Second droop filter time constant 5-695
G422 681
Second droop function activation
selection
5-695
G423 682 Second droop break point gain 5-695
G424 683 Second droop break point torque 5-695
G601 1003 Notch filter frequency 5-121
G602 1004 Notch filter depth 5-121
G603 1005 Notch filter width 5-121
G932 89
Speed control gain (Advanced
magnetic flux vector)
5-67
G942 569 Second motor speed control gain 5-67
Pr.
group
Pr. Name
Refer to
page
Tab. 5-16: Control Parameter (3)