Mitsubishi Electric FR-A800, Instruction Manual

Page: 859 / 1042

Parameters (G) Control parameters
FR-A800 5 - 679
Logic reversing of inverter run enable signal (X10 signal, Pr. 599)
●
Use Pr. 599 "X10 terminal input selection" to select the X10 signal input specification between
normally open (NO contact) and normally closed (NC contact). With the normally closed (NC
contact) input specification, the inverter output is shut off by turning OFF (opening) the X10
signal.
●
Changing the inverter logic (NO/NC contact) with the Pr. 599 setting is required according to the
logic of the inverter operation enable signal sent from the option unit.
●
The response time of the X10 signal is within 2 ms.
●
Relationship between Pr. 599 and the inverter operation enable signal of each option unit
Fig. 5-337:
X10 signal
I002755E
Pr.599 setting
Corresponding signal of the option unit
Operation according to the X10
signal status
FR-HC2 FR-CV FR-CC2
0
(Initial value of standard models
and IP55 compatible models) RDY
(negative logic)
(initial setting)
RDYB RDB
X10-ON: Inverter output shutoff
(NO contact)
1
(Initial value of separated
converter types)
RDY
(positive logic)
RDYA RDA
X10-OFF: Inverter output shutoff
(NC contact)
Tab. 5-311: Selecting NO/NC contact for X10 signal
NOTES If the X10 signal is unassigned while Pr. 30 = "2" (FR-HC2/FR-CV connection) or "10 or 11" (DC feed-
ing mode 1), the MRS signal can be used as the X10 signal. At this time, logic setting for the signal
will follow Pr. 17 "MRS input selection".
MRS signal is enabled from any of the communication or external input, but when using the MRS
signal as Inverter run enable signal (X10), it can be used as input from external.
When FR-HC or MT-HC is connected, set Pr. 599 = "0 (initial value)".
When the terminal assignment is changed with Pr. 178 to Pr. 189 (input terminal function selec-
tion), wiring may be mistaken due to different terminal name and signal contents, or may affect
other functions. Set parameters after confirming the function of each terminal.
Output frequency
X10 signal (Pr. 599 = 0)
X10 signal (Pr. 599 = 1)
ON
OFF
Time
Motor coasts to stop