Mitsubishi Electric FR-A800, Instruction Manual

Page: 393 / 1042

Parameters (E) Environment setting parameters
FR-A800 5 - 213
PID monitor indicator setting (Pr. 999 = "1 or 2")
Enabled when the FR-PU07-01 is used.
●
3-line monitor setting
The 3-line monitor is used as the first monitor.
●
Extended direct setting
Pressing the FUNC key of the FR-PU07-01 displays the extended direct setting screen. The PID
action set point can be directly set regardless of the operation mode or Pr. 77 "Parameter write
selection" setting.
Pressing the FUNC key on the extended direct setting screen displays the function menu.
●
Dedicated parameter list function
Pressing the PrSET key of the FR-PU07-01 displays the dedicated parameter list. Parameters that
need to be set first for the PID extended display setting are listed.
Pr. Name
Initial
value
Pr. 999 = "1" Pr. 999 = "2" Refer to page
759 PID unit selection 9999 9999 4
5-543
1142 Second PID unit selection 9999 9999 4
774 Operation panel monitor selection 1 9999 9999 52
5-327 775 Operation panel monitor selection 2 9999 9999 53
776 Operation panel monitor selection 3 9999 9999 54
C42 (934) PID display bias coefficient 9999 9999 0
5-543
C44 (935) PID display gain coefficient 9999 9999 100
1136 Second PID display bias coefficient 9999 9999 0
1138 Second PID display gain coefficient 9999 9999 100
— 3-step monitor setting — Disabled
Enabled
—
— Extended direct setting — Disabled
Enabled
—
— Dedicated parameter list function — Disabled Enabled —
Tab. 5-80: GOT initial setting (PU connector)
Extended direct setting Parameter to be set
Extended direct setting 1 Pr. 133 PID action set point
Extended direct setting 2 Pr. 755 Second PID action set point
Tab. 5-81: Parameter to be set by extended direct setting
Dedicated parameter list Parameter to be set
No. 1 Pr. 999 Automatic parameter setting
No. 2 Pr. 934 PID display bias coefficient
No. 3 Pr. 935 PID display gain coefficient
Tab. 5-82: Parameter to be set by dedicated parameter list
NOTE The display of parameters other than the above may be changed due to changes in C42 or C44.
Set the PID monitor indicator before changing the settings of other parameters.