Mitsubishi Electric FR-A800, Instruction Manual

Page: 356 / 1042

Position control under vector control and PM sensorless vector control Parameters
5 - 176
Cumulative pulse storage
●
The cumulative pulse monitor value can be retained when the power is turned OFF or the inverter
is reset.
Pr. 638
Cumulative pulse monitor
Cumulative pulse monitor
(control terminal option)
At power-OFF At reset At power-OFF At reset
0 Not stored in the EEPROM Cleared Not stored in the EEPROM Cleared
1 Stored in the EEPROM Retained Not stored in the EEPROM Cleared
2 Not stored in the EEPROM Cleared Stored in the EEPROM Retained
3 Stored in the EEPROM Retained Stored in the EEPROM Retained
Tab. 5-67: Pr. 638 settings
NOTES When the power is turned OFF during the reset process, the cumulative pulse monitor value and
the cumulative pulse carrying overflow times are not stored in the EEPROM.
For storing the cumulative pulse monitor value and the cumulative pulse overflow times, in the
EEPROM at power OFF, connect R1/L11 with P/+, and S1/L21 with N/- so that the control power is
retained. When connecting the high power factor converter (FR-HC2) or the converter unit
(FR-CC2), assign the instantaneous power failure detection (X11) signal to an input terminal to
input the IPF signal from the FR-HC2/FR-CC2 to the terminal for X11 signal.
Parameters referred to
Pr. 52 Operation panel main monitor selection => page 5-327