Mitsubishi Electric FR-A800, Instruction Manual

Page: 24 / 1042

Product checking and accessories Introduction
1 - 2
1.2 Product checking and accessories
Unpack the product and check the capacity plate on the front cover and the rating plate on the side
to ensure that the model agrees with the order and the product is intact.
1.2.1 Inverter model
Specification differs by the type. Major differences are shown in the table below:
Applicable for the FR-A820-00340(5.5K) or higher, and the FR-A840-00170(5.5K) or higher.
I002340E_B
Fig. 1-1: Inverter model FR-A800
Type Signal output
Initial setting
Built-in
EMC filter
Control
logic
Rated
frequency
Pr. 19 "Base
frequency
voltage"
FM
(terminal FM
equipped model) Terminal FM (pulse train output)
Terminal AM (analog voltage output
(0 to
±
10 V DC))
OFF Sink logic 60 Hz
9999 (same as the
power supply
voltage)
CA
(terminal CA
equipped model) Terminal CA (analog current output
(0 to 20 mA DC))
Terminal AM (analog voltage output
(0 to
±
10 V DC))
ON Source logic 50 Hz
8888 (95% of the
power supply
voltage)
Tab. 1-1: Differences between the types
F R - A 8 4 0 - 00023 - 1
Symbol Voltage class Symbol Structure, functionality Symbol Description Symbol Type
2 200 V class 0 Standard model
00023 to
12120
SLD rated inverter
current [A]
1 FM
4 400 V class 2 Separated converter type
0.4K to
500K
ND rated inverter
capacity [kW]
2 CA
6 IP55 compatible model
Symbol
Circuit board coating
(conforming to
IEC60721-3-3 3C2/3S2)
Plated conductor
Not used Not used Not used
-60 With Not used
-06
With With
Rating plate
Inverter model
Input rating
Output rating
Manufactured
year and month
SERIAL