Mitsubishi Electric FR-A800, Instruction Manual

Page: 160 / 1042

Frequently-used parameters (simple mode parameters) Basic operation
4 - 12
Initial value for the FR-A820-00077(0.75K) or lower and FR-A840-00038(0.75K) or lower.
Initial value for the FR-A820-00105(1.5K) to FR-A820-00250(3.7K) and the FR-A840-00052(1.5K) to
FR-A840-00126(3.7K).
Initial value for the FR-A820-00340(5.5K), FR-A820-00490(7.5K), FR-A840-00170(5.5K), and
FR-A840-00250(7.5K).
#
Initial value for the FR-A820-00630(11K) to FR-A820-03160(55K), FR-A840-00310(11K) to
FR-A840-01800(55K).
,
Initial value for the FR-A820-03800(75K) or higher and FR-A840-02160(75K) or higher.
$
For the FR-A820-03160(55K) or lower and FR-A840-01800(55K) or lower.
%
For the FR-A820-03800(75K) or higher and FR-A840-02160(75K) or higher.
&
The initial value for the FR-A820-00077(0.75K) or lower and FR-A840-00038(0.75K) or lower is set
to the 85% of the rated inverter current.
+
Initial value for the FR-A820-00490(7.5K) or lower and FR-A840-00250(7.5K) or lower.
'
Initial value for the FR-A820-00630(11K) or higher and FR-A840-00310(11K) or higher.
(
FM denotes the initial value for the FM type inverter that has the terminal FM, and CA denotes the
initial value for the CA type inverter that has the terminal CA.
9
H000
C103 Electronic
thermal O/L relay
0.01 A
$
Rated
inverter
current
&
0–500 A
$
Protects the motor from heat.
Set the rated motor current.
5-292
0.1 A
%
0–3600 A
%
79 D000
Operation mode
selection
1 0 0–4, 6, 7
Select the start and frequency command
sources.
5-263
125 T022
Terminal 2
frequency setting
gain frequency
0.01 Hz 60 Hz 50 Hz 0–590 Hz
Allows the frequency at the maximum
potentiometer setting (5 V in the initial
setting) to be changed.
4-27,
5-401
126 T042
Terminal 4
frequency setting
gain frequency
0.01 Hz 60 Hz 50 Hz 0–590 Hz
Allows the frequency at the maximum
current input (20 mA in the initial setting)
to be changed.
4-29,
5-401
160 E440
User group read
selection
1 0 0, 1, 9999
Restricts the parameters that are read by
the operation panel and parameter unit.
5-216
998 E430
PM parameter
initialization
1 0
0, 3003,
3103,
8009,
8109,
9009, 9109
Selects the PM sensorless vector control
and set the parameters that are required to
drive an PM motor.
5-70
999 E431
Automatic
parameter setting
1 9999
1, 2, 10, 11,
12, 13, 20,
21, 30, 31,
9999
Changes parameter settings as a batch.
The target parameters include
communication parameters for the
Mitsubishi's human machine interface
(GOT) connection and the parameters for
the rated frequency settings of 50 Hz/
60 Hz.
5-211
Pr.
Pr.
group
Name Unit
Initial value
(
Range Application
Refer
to
page
FM CA
Tab. 4-9: Simple mode parameters (2)