Mitsubishi Electric FR-A800, Instruction Manual

Page: 885 / 1042

Parameters Copying and verifying parameters using USB memory
FR-A800 5 - 705
Procedure for copying parameters to USB memory
NOTES When parameter settings are copied to USB memory without specifying a parameter setting file
number in USB memory, numbers are automatically assigned.
Up to 99 files can be saved on USB memory. When the USB memory device already has 99 files,
attempting copying of another file to the USB memory device causes the file quantity error (rE7).
Refer to the FR Configurator2 instruction manual for details on importing files to FR Configurator2.
During password lock, parameter copy and parameter verification cannot be performed (refer to
page 5-207).
Operation
Insert the USB memory into the copy source inverter.
USB memory mode
Press to change to the USB memory mode.
Displaying the file selection screen
Press three times to display (file selection screen) and press . (To overwrite files on USB
memory, display the file selection screen, turn to select the file number, and press .)
#
Copying to USB memory
Turn to change to " ". Press to copy the parameter settings at the copy source to USB memory.
(It takes about 15 seconds to copy all the settings. During copying, " " flickers.)
" " and "file number when the parameter file was copied to USB memory" flicker after copying ends.
Tab. 5-323: Copying parameters to USB memory