Mitsubishi Electric FR-A800, Instruction Manual

Page: 837 / 1042

Parameters (G) Control parameters
FR-A800 5 - 657
Application for variable-torque load (Pr. 14 = "1")
●
The output voltage will change in square curve against the output frequency at the base frequen-
cy or lower.
●
Set this parameter when driving a load with load torque change proportionally against the square
of the rotation speed, such as fan and pump.
Vertical lift load applications (Pr. 14 = "2, 3")
●
Set "2" when a vertical lift load is fixed as power driving load at forward rotation and regenerative
load at reverse rotation.
●
Pr. 0 "Torque boost" is valid during forward rotation, and torque boost is automatically changed
to "0%" during reverse rotation.
●
Set "3" for an elevated load that is in the driving mode during reverse rotation and in the
regenerative load mode during forward rotation according to the load weight, e.g. counterweight
system.
Fig. 5-325:
Variable-torque load
I002751E
I001547E
Fig. 5-326: Characteristic with manual torque boost
NOTE When torque is continuously regenerated as vertical lift load, it is effective to set the rated voltage
in Pr. 19 "Base frequency voltage" to prevent trip due to current at regeneration.
100%
Output frequency (Hz)
Pr. 3 Base frequency
Ou
tp
u
t v
o
lt
a
g
e
For vertical lift loads
At forward rotation boost ... Pr. 0 setting
At reverse rotation boost ... 0 %
Pr. 14 = 2
Pr. 0
Output v
o
ltage
Output frequency [Hz]
Base frequency
Forward
rotation
Reverse
rotation
For vertical lift loads
At forward rotation boost ... 0 %
At reverse rotation boost ... Pr. 0 setting
Pr. 14 = 3
Pr. 0
Output v
o
ltage
Output frequency [Hz]
Base frequency
Reverse
rotation
Forward
rotation