Mitsubishi Electric FR-A800, Instruction Manual

Page: 73 / 1042

Installation and wiring Control circuit
FR-A800 2 - 43
2.6.3 Wiring of control circuit
Control circuit terminal layout
This terminal operates as the terminal FM for the FM type, and as the terminal CA for the CA type.
Wiring method
●
Power supply connection
For the control circuit wiring, strip off the sheath of a cable, and use it with a blade terminal. For a sin-
gle wire, strip off the sheath of the wire and apply directly.
Insert the blade terminal or the single wire into a socket of the terminal.
Strip off the sheath for the below length. If the length of the sheath peeled is too long, a short
circuit may occur with neighbouring wires. If the length is too short, wires might come off.
Wire the stripped cable after twisting it to prevent it from becoming loose. In addition, do not
solder it.
I002373E
Fig. 2-26: Terminal layout
I002397E
Fig. 2-27: Preparation of the cable
AM
2 5 4 1 F/C +24 SD SD S1 S2 PC A1 B1 C1 A2 B2 C2 SIC So SOC
5 10E 10 SE SE SU RUN IPF OL FU PC RL RM RH RT AU SD SD CS STP MRS RES STF STR JOG
∗1
∗2
Cable stripping size
10 mm